Welcome to Feasycom Store!

My cart (0)

Cart is empty

cart empty Browse Products
Subtotal: $0.00
View Cart Checkout

FSC-BT1058 Qualcomm QCC5181 BT5.3 Classic & LE Audio Transceiver Module

FSC-BT1058 is a cutting-edge dual-mode Bluetooth 5.3 transceiver module that leverages the advanced Qualcomm QCC5181 chipset, supports receiving and transmitting both Blutooth LE audio and Classic audio, offers comprehensive features such as LC3 codec, multi-stream, Auracast broadcast audio, hearing aid support, hybrid active noise reduction, cVc, aptX, aptX-HD and aptX-Adaptive. Preloaded with Feasycom firmware, it’s very powerful and easy-to-use.

wishlist Share Link
wechat wechat wechat
$13.90
        • Qualcomm QCC5181 Bluetooth® v5.3 wireless MCU to execute Bluetooth protocol stack. Integrated dual 240 MHz Qualcomm® Kalimba™ audio DSPs and 32/80 MHz Developer Processor for applications.
        • Bluetooth LE Audio:
          • LE Isochronous Channel(CIS/BIS/ISOAL)
          • LC3 codec, multi-stream, Auracast broadcast audio and hearing aid
          • Bluetooth Classic Audio:
            • Bluetooth Synchronous Connection-Oriented Channel(SCO: HFP)
            • Bluetooth Asynchronous Connection-Less Channel(ACL: A2DP)
            • Advanced audio algorithms Qualcomm® aptX™and aptX HD Audio
            • aptX Adaptive, enabled using license key
          • RF Specification:
            • Bluetooth v5.3 dual mode transceiver
            • Support both Bluetooth® Classic Audio and LE Audio
            • Classic Bluetooth audio receive to LE audio transmit
            • 2 Mbps Bluetooth Low Energy
            • Qualcomm® Bluetooth High Speed Link
            • Single ended antenna connection with on-chip balun and Tx/Rx switch
            • Bluetooth BR/EDR/BLE profiles: SPP, ATT, GATT, etc.
            • Class 1 Bluetooth power level supported
          • General:
            • 13mmx26.9mm stamp 52-pin package
            • On-board antenna, support installing external Feasycom antenna or other antenna
            • High-performance 24-bit stereo audio interface
            • Digital and analog microphone interfaces
            • Flexible LED controller and LED pins with PWM support
            • Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0
            • Active Noise Cancellation: Hybrid, Feedforward, and Feedback modes, using Digital or Analog Mics, enabled using license keys available from Qualcomm®
            • Qualcomm® LE Audio, aptX™ and aptX™ HD Audio, LDAC
            • aptX™ Adaptive, enabled using license key
            • Qualcomm® cVc™ Noise Cancellation Technology, enabled using license key
            • Integrated PMU: Dual SMPS for system/digital circuits, Integrated Li-ion battery charger
            • Support the OTA upgrade
            • Support in-depth Custimization
            • Works with FeasyLEA LE audio app
Chip QCC5181
Bluetooth Version V5.3
Transmit Power +15 dBm (Typ VBAT=3.7V)
Receive Sensitivity -96.5 dBm (typ.) π/4 DQPSK receiver sensitivity
-90.0 dBm (typ.) 8DPSK receiver sensitivity
-100.5 dBm (typ.) BLE 1 Ms/s receiver sensitivity
Raw Data Rates (Air) 3 Mbps (Classic BT - BR/EDR)
Interfaces USB2.0 Full Speed, UART, I²C, SPI, 10-bit ADC, 20 GPIOs
Audio CODEC LE Audio, aptX, aptX HD, aptX Adaptive (enabled using license key), SBC and AAC audio codecs
Profiles BR/EDR: A2DP/AVRCP/HFP/HSP/HOGP/PBAP/SPP
BLE: GATT Client & Peripheral
Maximum Connections BR/EDR: up to 7 active slaves
BLE: 1 connection as peripheral, up to 5 connections as central
FW upgrade Via UART (TBD), USB (TBD), OTA, SPI
Supply Voltage VDD_IO: 1.7V ~ 3.3V; VBAT_IN: 2.8V ~ 4.30V
Power Consumption (Load=10KΩ, VBAT_IN=3.3V) Play: < 5mA (0dB 1KHz sine wave signal)---*Average
OFF: < 100uA---*Average
Dimensions (mm) 13 × 26.9 × 2.2; Pad Pitch 1.0
Operating Temperature -40°C to +85°C
Storage Temperature -40°C to +85°C
Media Device
Datasheet