Bienvenido a la tienda Feasycom!

Mi carrito (0)

El carrito está vacío

carro vacío Explorar productos

FSC-BT1058 Qualcomm QCC5181 BT5.3 Classic & LE Audio Transceiver Module

FSC-BT1058 is a cutting-edge dual-mode Bluetooth 5.3 transceiver module that leverages the advanced Qualcomm QCC5181 chipset, supports receiving and transmitting both Blutooth LE audio and Classic audio, offers comprehensive features such as LC3 codec, multi-stream, Auracast broadcast audio, hearing aid support, hybrid active noise reduction, cVc, aptX, aptX-HD and aptX-Adaptive. Preloaded with Feasycom firmware, it’s very powerful and easy-to-use.

$13.90
        • Qualcomm QCC5181 Bluetooth® v5.3 wireless MCU to execute Bluetooth protocol stack. Integrated dual 240 MHz Qualcomm® Kalimba™ audio DSPs and 32/80 MHz Developer Processor for applications.
        • Bluetooth LE Audio:
          • LE Isochronous Channel(CIS/BIS/ISOAL)
          • LC3 codec, multi-stream, Auracast broadcast audio and hearing aid
          • Bluetooth Classic Audio:
            • Bluetooth Synchronous Connection-Oriented Channel(SCO: HFP)
            • Bluetooth Asynchronous Connection-Less Channel(ACL: A2DP)
            • Advanced audio algorithms Qualcomm® aptX™and aptX HD Audio
            • aptX Adaptive, enabled using license key
          • Especificación de RF:
            • Bluetooth v5.3 dual mode transceiver
            • Support both Bluetooth® Classic Audio and LE Audio
            • Classic Bluetooth audio receive to LE audio transmit
            • 2 Mbps Bluetooth Low Energy
            • Qualcomm® Bluetooth High Speed Link
            • Single ended antenna connection with on-chip balun and Tx/Rx switch
            • Perfiles Bluetooth BR/EDR/BLE: Spp, A, Gatte, etc..
            • Clase 1 Bluetooth power level supported
          • General:
            • 13mmx26.9mm stamp 52-pin package
            • Antena a bordo, Admite la instalación de la antena externa de Feasycom u otra antena
            • High-performance 24-bit stereo audio interface
            • Digital and analog microphone interfaces
            • Flexible LED controller and LED pins with PWM support
            • Serial interfaces: Uart, Bit Serializer (I²C/SPI), USB 2.0
            • Active Noise Cancellation: Hybrid, Feedforward, and Feedback modes, using Digital or Analog Mics, enabled using license keys available from Qualcomm®
            • Qualcomm® LE Audio, aptX™ and aptX™ HD Audio, LDAC
            • aptX™ Adaptive, enabled using license key
            • Qualcomm® cVc™ Noise Cancellation Technology, enabled using license key
            • Integrated PMU: Dual SMPS for system/digital circuits, Integrated Li-ion battery charger
            • Apoya la actualización de OTA
            • Apoyar la custimización en profundidad
            • Works with FeasyLEA LE audio app
Chip QCC5181
Versión de Bluetooth V5.3
Transmisión de potencia +15 dbm (Typ VBAT=3.7V)
Recibir sensibilidad -96.5 dbm (typ.) π/4 DQPSK receiver sensitivity
-90.0 dbm (typ.) 8DPSK receiver sensitivity
-100.5 dbm (typ.) Bolle 1 Ms/s receiver sensitivity
Raw Data Rates (Air) 3 Mbps (Classic BT - BR/EDR)
Interfaces USB2.0 Full Speed, Uart, I²C, SPI, 10-bit ADC, 20 GPIOs
Audio CODEC El audio, aptX, aptX HD, aptX Adaptive (enabled using license key), SBC and AAC audio codecs
Perfiles BR/EDR: A2DP/AVRCP/HFP/HSP/HOGP/PBAP/SPP
Bolle: GATT Client & Peripheral
Maximum Connections BR/EDR: arriba a 7 active slaves
Bolle: 1 connection as peripheral, arriba a 5 connections as central
FW upgrade Via UART (TBD), USB (TBD), OTA, SPI
Voltaje de suministro VDD_IO: 1.7V ~ 3.3V; VBAT_IN: 2.8V ~ 4.30V
Power Consumption (Load=10KΩ, VBAT_IN=3.3V) Play: < 5mA (0dB 1KHz sine wave signal)---*Average
OFF: < 100uA---*Average
Dimensiones (mm) 13 × 26.9 × 2.2; Pad Pitch 1.0
Temperatura de funcionamiento -40°C to +85°C
Temperatura de almacenamiento -40°C to +85°C
Dispositivo multimedia
Chat now Email