Welkom by Feasycom Store!

My mandjie (0)

Cart is empty

cart empty Browse Products

FSC-BT690 DA14531 Ultra-Mini-Size BLE 5.1 Module

FSC-BT690 is a Bluetooth Low Energy 5.1 (BLE5.1) module that integrates a 2.4 GHz transceiver and an ARM® Cortex-M0+TM microcontroller, featuring 48 kB of RAM and 32 kB of One-Time Programmable (OTP) memory. It can function as a standalone application processor or as a data pump in hosted systems. Its low active RF, MCU current, and low-power mode consumption ensure excellent battery life, suitable for operation on small coin cell batteries and in energy-harvesting applications. The BLE firmware includes L2CAP service layer protocols, Security Manager (SM), Attribute Protocol (ATT), the Generic Attribute Profile (GATT), and the Generic Access Profile (GAP), supporting all Bluetooth® SIG profiles and custom profiles. The FSC-BT690 is ideal for disposables, wireless sensor nodes, beacons, proximity tags and trackers, smart HID devices (such as stylus, keyboards, mice, and trackpads), toys, and medical and industrial applications.

$3.90
  • 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 5.1
  • Supports up to three BLE connections
  • Typical cold boot to radio active 35 ms
  • 16 MHz 32-bit ARM® Cortex-M0+ with SWD interface
  • Dedicated Link Layer Processor
  • AES-128 Encryption Processor
  • 32 kB One-Time-Programmable (OTP)
  • 48 kB Retainable System RAM
  • 144 kB ROM
  • Clock-less hibernation mode: 270 nA
  • 10-bit ADC for battery voltage monitoring
  • Built-in temperature sensor for die temperature monitoring
  • TX: 3.5 mA, RX: 2.2 mA (system currents with DC-DC, VBAT_HIGH = 3V and 0 DBM)
  • Programmable transmit output power from -19.5 dBm to +2.5 DBM
  • -94 dBm receiver sensitivity
  • Support SPI, Uart, I²C interface
  • Support the OTA upgrade (Requires external SPI Flash or EEPROM)
  • Operating Voltage: 1.1V to 3.6V
  • Bedryfstemperatuur: -40° C tot +85 ° C
Kategorieë Funksies Implementering
Wireless Specification Skyfies DA14531
Bluetooth Version BLE 5.1
Frequency 2.400 ~ 2.483.5 GHz
Gelei krag -19.5 ~ +2.5 DBM
Ontvang sensitiwiteit -94 DBM (Typ.)
Modulation GFSK
Host Interface and Peripherals Uart TX, RX
General Purpose I/O
Default 115200, N, 8, 1
Baudrate support from 1200 to 921600
5, 6, 7, 8 data bit character
GPIO 6 (maximum - configurable) lines
Pull-up resistor (33 ) control
Read pin-level
I²C 2 (configurable from GPIO total), up to 400 Kbps
ADC Analog input voltage range: 0.4V ~ 1.4V (or 2.4V) based on configure
Supports single 10-bit SAR ADC conversion
2 channels (configured from GPIO total)
Up to 200 Msps conversion
PWM 2 PWM outputs
Supports edge-alignment or center-alignment
Supports fault detection
Profiles Class Bluetooth No Support
Bluetooth Lae energie GATT Client & Peripheral - Any Custom Services
Maximum Connections Supports up to three BLE connections
FW upgrade J-Link
Toevoerspanning Supply 1.1V ~ 3.6V
Kragverbruik 1.6 uA (Sleep)
Physical Dimensies (mm) 5.4 × 5.8 × 1.2; Pad Pitch 0.8
Environmental Bedryfstemperatuur -40° C ~ +85 ° C
Bergingstemperatuur -40° C ~ +85 ° C
Verskillend Loodvry Loodvry ​​en ROHS voldoen aan
Volmag Een jaar
Vogtigheid 10% ~ 90% nie-kondenseerend
MSL -graad MSL 3
ESD -graad Menslike liggaamsmodel ±2000V
Charged Device Model ±500V
Asset Tracking
Consumer Electronics
Industrial Automation
sensor
Smart Healthcare
Wearables